TAKER H743 BT Flight Controller

Features

1. Addopts the high-performance STM32H743 as the main controller
2. Equipped with MPU6000 and 42688-P dual gyroscopes
3. 512M of black box storage
4. Bluetooth parameter tuning
5. Integrated LC filter
6. Upgraded type-C USB interface
7. Direct plug-in compatibility with DJI Air Unit
8. Integrated Barometer
9. Features 7 groups of UART
10. [email protected]+ 5V@3A dual independent BEC
11. Offers multiple firmware options

Specifications

• MCU: STM32H743
• IMU: MPU6000 + ICM42688-P(dual gyro)
• Air Unit Connection: Directly plugs into DJI Air Unit
• Black Box512M onboard
• Bluetooth: Supported
• Barometer: Supported
• USB Interface: Type-C
• OSD: BetaFlight OSD w/ AT7456E chip
• BEC Output: 5V@3A,[email protected] BEC
• Firmware Target: GEPRC_TAKER_H743
• Size: 38.538.5mm, mounting hole size 30.530.5mm
• Input Voltage: 3-6S LiPo
• UART Ports: 7 groups (UART3 fixed for Bluetooth)
• Power Filtering: Integrated LC filter
• Weight8.4g

Includes

1 x FC board

1 x O3 3-in-1 connection cable

1 x FC adapter cable

1 x sh1.0 4pin silicone cable

1 x Camera connection cable

1 x VTX connection cable

1 x Buzzer connection cable

4 x Silicone grommets

GEPRC TAKER H743 BT flight controller with USB-C and plug-in connectors for drone electronics wiring.

Specification summary for the TAKER H743 BT flight controller, including MCU, USB TypeC, black box memory, and input voltage range.

This chart highlights key features of the TAKER H743 BT flight controller, including STM32H743 MCU, dual gyros, Bluetooth tuning, and USB-C.

GEPRC TAKER H743 BT flight controller board with USB-C and connector ports shown from two angles.

Shown is the GEPRC TAKER H743 BT flight controller board with USB-C and plug-in connector layout from multiple angles.

This H743 flight controller is shown with its USB-C port and connector layout, along with the listed included cables and grommets.