SpeedyBee Programmable 2812 Arm Light LED Strip Set (4pcs) 5V DIN/DO, SH1.0 Cable, Chainable

Overview

SpeedyBee Programmable 2812 Arm Light is a LED strip set (4 pcs) designed for FPV drone arms, supporting connection to a flight controller with or without soldering. It provides 5V power and addressable LED signal input/output for chaining strips.

Key Features

• Two connection methods to flight controller: soldering or connector
• Supports connecting in series with or without soldering
• Up to 8 LED strips in series max
• Betaflight limit noted: 32 individual LEDs
• Signal/power pads and direction marking: DIN (LED signal input), DO (LED signal output), 5V, G (GND)

Specifications

For installation and compatibility questions, contact [email protected] or visit https://rcdrone.top/.

Whats Included

• LED Strip*4
• 50mm 3pin SH1.0 female cable
• 35MM heat shrink tube*4

Applications

• FPV drone arm lighting and orientation
• Addressable LED builds using 5V DIN/DO signal chaining

Details

SpeedyBee 2812 arm lights add bright red LED visibility on a drones arms for orientation during flights.

The SpeedyBee 2812 arm light board can connect to a flight controller either by soldering pads or using the plug-in connector leads.

SpeedyBee 2812 arm light strips can be daisy-chained in series using the connector or by soldering, with up to 8 strips (32 LEDs) supported.

SpeedyBee 2812 arm light uses DIN/DO pads plus 5V and GND connections for simple LED signal in/out wiring.

The SpeedyBee 2812 arm light comes in a compact 37mm x 6.5mm form factor with an approximate weight of 1.18g for lightweight installs.

The 2812 RGB LED specs list typical 120 viewing angle and wavelength ranges of 620625 nm (R), 525530 nm (G), and 465470 nm (B).

At IF=12mA, the LED specs list 200400 mcd for red/blue, 8001000 mcd for green, and wavelengths of 620625 nm (red), 525530 nm (green), and 465470 nm (blue).

The kit includes four LED strips, four 50mm 3-pin SH1.0 female cables, and four 35mm heat shrink tubes for a clean install.