RATEFPV ELRS 2.4G Receiver with IPEX Gen 1 T-Antenna

Overview

The RATEFPV ELRS 2.4G receiver is a compact ExpressLRS receiver for FPV builds. It uses an IPEX Generation 1 antenna connection and a dipole T-shaped antenna, with 40 mm and 90 mm antenna-length options to suit different frame layouts. Semi-hole solder pads provide a larger contact area for receiver wiring.

Key Features

• ExpressLRS 2.4G receiver with CRSF/SBUS protocol support.
• IPEX Generation 1 antenna interface.
• Dipole T-shaped antenna available in 40 mm or 90 mm lengths.
• Semi-hole solder pads for firm solder joints and easier wire replacement.
• Compact 17 x 10.7 x 3 mm form factor.
• Receiver pads are labelled RX, TX, 5V, and GND for flight-controller connection.

Specifications

Installation Notes

Connect receiver TX to the flight controller RX, and receiver RX to the flight controller TX. Connect the 5V and GND pads to the corresponding flight-controller power pads. Install the antenna before powering the receiver, and do not operate it above the specified input voltage.

What’s Included

• RATE ELRS 2.4G receiver
• One 40 mm or 90 mm T-shaped antenna
• One 4-pin flat cable
• Two 14 x 20 mm heat-shrink tubes

For product support and installation assistance, contact rcdrone.top.

Details

The compact receiver uses semi-hole solder pads to provide a larger contact area for secure wiring and easier replacement.

Choose a 40 mm or 90 mm dipole T-antenna to suit the available space and layout of an FPV frame.

The package includes a T-shaped antenna, 4-pin flat cable, and two 14 x 20 mm heat-shrink tubes for installation.