ATOMRC F405 NAVI Delux V1.1 Flight Controller Kit for Fixed-Wing (INAV/ArduPilot) with USB-C, BLE/Wi-Fi

Overview

The ATOMRC F405 NAVI Delux V1.1 flight controller is designed for fixed-wing builds and supports INAV and ArduPilot firmware. It integrates Bluetooth and Wi-Fi modules for wireless control and field parameter updates, and uses an external USB port for plug-and-play setup. A built-in 9V and 5V BEC supports onboard power distribution in a compact 50 x 31 x 17 mm, 29 g package.

Key Features

• INAV and ArduPilot firmware compatibility
• Integrated Bluetooth (BLE) and Wi-Fi modules (included in the kit)
• External USB-C port board for convenient access
• Built-in 9V and 5V BEC
• Micro SD card slot
• Wiring support shown for GPS, DJI Air Unit, analog camera/VTX, CRSF receiver, WS2812 LED strip, and Frsky R-XSR
• Jumper-selectable function shown: Close = BLE, Open = UART1

For setup assistance and after-sales support, contact [email protected] or visit https://rcdrone.top/.

Specifications

Whats Included

• F405 NAVI Delux V1.1 x1
• F405 NAVI Delux PWR V1.1 x1
• F405 NAVI Delux BLE V1.1 x1
• F405 NAVI USB cable, L=70 mm x1
• F405 NAVI DJI cable, L=450 mm x1
• F405 NAVI GPS cable, L=150 mm x1
• F405 USB small board x1
• F405 USB small board 3M glue x1
• F405 NAVI CAM 3PIN cable, L=300 mm x1
• F405 NAVI Uart 4PIN cable, L=300 mm x2
• DuPont connector 4PIN cable, L=300 mm x1
• DuPont connector 3PIN cable, L=300 mm x1
• 16AWG power cable, L=300 mm x1
• F405 NAVI Delux flight control 3M glue x1
• 50V 1000uF capacitor x1
• XT60 plug x1
• M2 x 11 copper column x4
• 1.0 white shock-absorbing gasket x12
• M2 x 4.5 x 2.6 flat head cross screw x8

Applications

• Fixed-wing flight controller upgrades and new builds
• FPV fixed-wing integration with GPS, camera/VTX, and supported digital/receiver wiring shown in the wiring diagram

Details

Everything needed to install the controller is included, from the power board and BLE module to USB/GPS/DJI leads, XT60, capacitor, and mounting hardware.

Clear port mapping helps wire GPS, receiver, camera/VTX or DJI Air Unit, LED strip, and Micro SD logging for INAV or ArduPilot fixed-wing builds.