10.1-inch IPS Capacitive Touch Screen Monitor 1920×1080 HDMI + Micro USB for Raspberry Pi/Jetson/RDK X3

Overview

This 10.1-inch capacitive touch screen is a computer peripheral display designed for Raspberry Pi, Jetson series boards, and the RDK X3 board. It features an IPS panel with HDMI video input (up to 1080p) and Micro USB (5V) for touch and power, plus key-based backlight adjustment and a driver-free display setup for supported systems. The rear layout includes copper pillar mounting holes for Raspberry Pi (M2.5) and cable routing space to help keep wiring tidy.

Key Features

• 10.1 inch IPS screen; 178 viewing angle
• Resolution: maximum 1920×1080 (1080p); 1280×800 recommended
• Capacitive touch; tempered glass touch panel
• Interfaces: HDMI for video; Micro USB for touch and power
• Drive-free display; supports backlight (brightness) adjustment by key switch
• Compatibility notes:
  • Raspberry Pi: supports Raspbian (five point touch, no drive); Ubuntu/Kai/Win10 IoT/Kodi (single touch, no drive)
  • Jetson series: supports all Jetson boards
  • RDK X3 board: capacitive touch, driver-free
  • Computer: supports Win7/8/10/11 (five point touch, no drive)
  • Game console: Microsoft Xbox 360, Sony PS4, Nintendo Switch, etc.
  • Set-top box: supports mainstream TV set-top boxes and digital cameras (display only)
• Supports computer split screen (used as an extension screen)

Specifications

Button & Interface Description

• A: Touch interface for touch and power
• B: Power interface for power supply only
• C: HDMI interface use HDMI cable to connect the signal source device; maximum supported resolution is 1080P
• D: Side button (BACKLIGHT) used to adjust brightness. Press once to increase brightness by 10%. After reaching 100%, press again to return to 10%. Press and hold for 3 seconds to turn off the backlight, then press again to restore original brightness.
• E: Copper pillar hole for fixing Raspberry Pi (M2.5)

What’s Included

• 10.1-inch IPS high-definition touch screen
• Bracket
• Screwdriver + screws + copper posts
• Double-ended standard HDMI cable (Length: about 100cm)
• Micro USB touch and power supply cable (Length: about 100cm)
• Micro USB touch and power supply cable (Length: about 40cm)
• Micro-HDMI to HDMI adapter

Applications

• Raspberry Pi / Jetson / RDK X3 development and embedded system projects
• Education and interactive demos
• PC extension display (split screen)
• Display for supported game consoles, set-top boxes, and digital cameras (display only where applicable)

For compatibility or wiring questions before purchase, contact [email protected] or visit https://rcdrone.top/.

Details

A 10.1-inch IPS capacitive touch screen with HDMI video and USB touch/power for Raspberry Pi, Jetson, and PCs.

Connect HDMI for video and Micro USB for touch and 5V power for a simple, driver-free setup on supported systems.

Rear ports include HDMI plus Micro USB for touch and power, with a dedicated button for backlight brightness adjustment.

Cable routing space on the back helps keep builds cleaner for robotics and embedded projects.

The capacitive panel delivers accurate, responsive touch control for interactive projects and desktop use.

Use it as a secondary monitor for split-screen workflows by connecting HDMI for display and USB for touch control.

Detailed dimensions help confirm fit for enclosures, kiosks, and custom mounts before installation.

Everything needed to start: touchscreen, bracket, cables, and mounting hardware for common Raspberry Pi installations.